The Teknologg ASW-39 WIFI sensors are used for Air Pressure & temperature-humidity monitoring using WIFI.
Features:
- Long term stability
- Supports HTTP/HTTPS/TCPIP/MQTT
- Station/SoftAP WIFI Modes Support
- Local/Cloud Monitoring
- High Accuracy
- Programmable Alarm Points
- Easy installation
The Teknologg ASW-39 WIFI sensors are used for Air Pressure & temperature-humidity monitoring using WIFI.
Air Pressure Values are compensated over temperature changes to achieve best accuracy.
Internal WIFI supports both Station/SoftAp, so it is possible
to access sensor data on local network or directly connect to device and get data.
Using Teknologg Mobile Application/Daloco Software Data can
be read from device.
The sensor can connect to The Teknologg cloud servers by
default. In order to connect this device to other IOT platforms please contact us before purchasing.
Air Pressure Characteristic
Measuring range 300 ~ 1100 hPa
Not for use in condensing conditions
Accuracy ±1 hPa @ t>0
±1.7 hPa @[-20 ~ 0] °C
Repeatability 0.1 hPa
Resolution 0.1 hPa
Long-term drift ±1 hPa/yr.
Temperature Characteristic
Measuring range -30 ~ 65°C
Not for use in condensing conditions
Accuracy ±0.5 °C @ 0 ~ 65°C
±1.25 °C @ -30 ~ 0 °C
Repeatability ±0.1 °C
Resolution 0.1 °C
Humidity Characteristic
Measuring range 0 ~ 100%
Not for use in condensing conditions
Accuracy typ. ±3% R.H
Repeatability 1 % R.H
Resolution 0.1 % R.H
Long-term drift : <0.5 %RH/yr.
Response Time (τ63%) 1 s
WIFI Parameters:
Frequency 2.4GHz EEE802.11b/g/n
Output Power +20dbm for 11b mode
Receiver Sensitivity -94 dBm
WIFI Modes Station/SoftAP
General Parameters:
| Power Supply | 5~ 12 VDC |
| Power Cable | DC Female power Connector |
| Power Cable Length | 1.5 meter (can be extend as request) |
| Housing | IP40 |
| Dimensions | 88.5x63x27.5 mm |
