AS-38 carbon Monoxide sensors with built in Electrochemical sensor ideal for health, environmental, industrial and residential monitoring of Co values.
Features:
- Electrochemical sensor
- Long Life
- Analog/Modbus output
- Low cross-sensitivity to other gases
- Optional automatic error correction based on reference calibration values
- Easy installation
The Teknologg AS-38 carbon Monoxide sensors with built in Electrochemical sensor ideal for health, environmental, industrial and residential monitoring of Co values.
Co Values Compensated over temperature using internal temperature sensor.
AS-38 supports optional USB interface with the Daloco software. This feature provides Real time data monitoring and uploading calibration table of sensor, after calibrating it in the third party laboratories.
AS-38 supports automatic error correction based on reference calibration values, this feature guaranties sensor accuracy in different conditions and longtime operation.
Applications:
- Residential and Commercial CO Monitoring
- Industrial CO Monitors
- Ventilation Control
- RV and Marine CO Monitoring
- Indoor Air Quality
- Outdoor Air Quality
| CO | Characteristics |
|---|---|
| sensor Type | Electrochemical sensor |
| Measuring range | 0 ~ 1000 ppm |
| Response Time – T(90) | < 30 seconds (15 seconds typical) |
| Repeatability | < ± 2 % of reading |
| Detection Limit | 0.5 ppm |
| Operating Conditions | -30 to 55 °C 15 to 95% –non-condensing |
| Expected Operating Life | > 5 years (10 years @ 23 ± 3 °C; 40 ± 10% RH) |
General Parameters:
| Power Supply | 5~ 12 VDC |
| Output | voltage /current/Modbus |
| Connection | Gx12*4 pin |
| Cable Length | 4 Wire cable, Length: 1.5 meter (can be extend as request) |
| Dimensions | 122×58.8×34.3 mm |
| Product Number | Details |
|---|---|
| AS38.1.y | Sensor with Voltage outputs |
| AS38.2.y | Sensor with 4~20 mA outputs |
| AS38.3.y | Sensor with Modbus RTU |
| AS38.x.0 | Sensor without USB Interface |
| AS38.x.1 | Sensor With USB Interface |